Is there anyone on the forum who can describe the mode of operation of the variable capacity oil
pump on the later Aj126 engines.
I’ve had a look at the workshop manual and other than describing it as an electric oil pump ( which it isn’t as it’s driven by chain) and how to remove it, it singularly fails to mention anything to do with its operation or control compared to the mechanical pump.
I’ve also looked extensively online for information but turned up blank.
I’m guessing it’s controlled by the ECM and is load sensitive, rather than purely rpm sensitive.
What I’m trying to find out is if the electrical input which appears to be on two pins energises the solenoid to reduce volume/ pressure and / or if disconnected it will perform just like an ordinary mechanical pump.
Thanks in anticipation.
pump on the later Aj126 engines.
I’ve had a look at the workshop manual and other than describing it as an electric oil pump ( which it isn’t as it’s driven by chain) and how to remove it, it singularly fails to mention anything to do with its operation or control compared to the mechanical pump.
I’ve also looked extensively online for information but turned up blank.
I’m guessing it’s controlled by the ECM and is load sensitive, rather than purely rpm sensitive.
What I’m trying to find out is if the electrical input which appears to be on two pins energises the solenoid to reduce volume/ pressure and / or if disconnected it will perform just like an ordinary mechanical pump.
Thanks in anticipation.