Tyres / Spacers

X

XZ4

New member
I was looking at changing to Michelin PS4S and see some have changed the rears to 305/30-20 instead of the 295/30.. Do these fit with no rubbing without spacers fitted.

Also I was thinking about 15mm Eibach spacers all round . Do the original studs need modified to fit these with my Cyclone wheels or are the cut outs in the back of the wheel there to allow them to fit without mods ?

Thanks in advance.
 
I believe a few mm of each stud needs to be ground down for the wheel to sit correctly. Didn’t do this myself so not first hand advice. I’m sure others will confirm.
 
XZ4 said:
I was looking at changing to Michelin PS4S and see some have changed the rears to 305/30-20 instead of the 295/30.. Do these fit with no rubbing without spacers fitted.

Also I was thinking about 15mm Eibach spacers all round . Do the original studs need modified to fit these with my Cyclone wheels or are the cut outs in the back of the wheel there to allow them to fit without mods ?

Thanks in advance.
Click to expand...

I think I answered your question on another forum although I have gyrodynes,
 
You must log in or register to reply here.
Back
Top