Climate control drivers side not working

N

Nick

New member
Have done some searches but nothing yet.

Went to adjust the temperature/seat temp dial and it doesn’t work, stuck on “low”, seat heater also doesn’t work.

Has anyone had this, suspect the dial is u/s
 
Is the passenger side working? Have you checked any fuses (I don't know which ones for your MY)?
 
Passenger side is working, I have dual climate control, when I set it to single control the pax temperature changes to Low mirroring the drivers side.

I will have a look into fuses, didn’t think to check as it was actually showing low, and thought if a fuse had gone it would be blank.
 
Nick said:
I will have a look into fuses, didn’t think to check as it was actually showing low, and thought if a fuse had gone it would be blank.
Click to expand...

No, that's me not thinking! But if there are straws to clutch at .... ;)
Good luck with getting it sorted out.
 
1. Whip off the positive lead form the battery for half a minute - small adjustable required.
2. If issue is still there, likely culprit is the connections to the small panel at the back of the control cluster - lots of thin plastic pry bars needed and Torx
 
You must log in or register to reply here.
Back
Top