Bit of a recap the reverse camera does not work out of the box on my car and flickers that have suggested the splice route?has any one done this below is there response
Thanks for your email, we have seen this before.
This can happen if the reverse data in the vehicle is not correct for the system. You can resolve this by connecting the orange Rear-C wire on the power loom to the reverse light positive of the car, when this orange wire receives 12v then the screen will switch to the factory system to view the camera. This will stabilise the signal.
Alternatively, you can hold the HOME button to switch out and view the reverse camera.
Sincerely,
Response Team