Recent content by Philskill

Official Jag one, very soft fleecy inside, it's been great, but it doesnt live outside so cant comment, more of a dust cover in the winter for me, also too bulky for regular use, was about £150 iirc

Hopefully looking at this you should be able to work it out. Pin 1 is the GND, on the Brown/White, Pin 4 is the signal on Grey/Brown, Pin 5 is the 5V on Green/Brown Look at you other side and you shoudl be able to work it out, from this diagram.

Wow, thats a fundamental error!, what cable spec did you use to connect from that stud to the Battery? If I have the right stud (As I dont have the F-Type electrical connection location Diagram to be sure) it's "BLUE/RED" -> C11BH-C11BJ -> "BLUE", and is the power cable to the power steering...

Checkout this thread, as there is a connector that can easily corrode, but there are (at least) 2 locations it could be. https://www.ftypeforums.co.uk/viewtopic.php?t=4482 This was mine after not a lot of mileage...

Thanks to some lovely builder leaving a nail gun nail lovingly on the road in my village I now have a spare Pirelli Tyre available from the opposing right rear side as I am replacing both with Michelins. Pirelli Rear 295/30 R20 Y101 P-Zero 4mm tread on 10000 miles, from a late 2018 P300...

Hi, I have an almost identical 2.0l 2019 R-Dynamic and can confirm there is indeed an earthing point and pass through of heavy duty starting cables on that inner wing

Didn't get to stay long or manage to meet anyone from the Forum, but a good number of F-types made it, and weather was kind enough!

Hi RPSN, This is from the Manual I have for the I4.

Hi Chris Thanks, yes if it has the same locking ring which is likely, then when they say Switch, then mean swivel that ring around until it will pull out straight. Dont turn the Aluminium case.

Total guess, as i've not done it on the F-type and mine is LED, but I reckon it's to do with this bit circled. But note that looks like a Xenon Bulb, they rarely go, its usually the Ballast module that fails. I did this on my RR, tried a new bulb, but ended up getting a Ford module from e-bay...

Passed X19 TAP going the other way in Hornchurch Yesterday (Sun) :D , Immediately recognised the plate from pictures on here, I was in my Evoque on way home from Visiting friends for the weekend.

This is the locking nut and locking adaptor you should have?

Hi Gus and Happy new year I have MotoTile in my garage, fitted myself. If you Jack direct on the tile, it does cause a depression, but it reverts after a few hours. Generally I still use a piece of hardwood under the front wheels of the Hydraulic Jack.

My 2.0l does not seem to have that unit. You can see the empty bracket at the top of the pic.